1.Off Grid Inverter
2.Pure Sine Wave Inverter
3.Suitable for Solar/Wind Power System
220V 230V 240V 8KW Off Grid Inverter With Charger For Solar System
SSI1 / 1 series single-phase inverter combine the most advanced online technology and the latest network communication technology, providing a complete power solution for strict demand applications. It is with small size, light weight and high efficiency. There is almost no noise in AC mains state. With PWM technology, inverter power outputs pure sine wave, applying to capacitive, inductive and nonlinear mixed-load,with superior load capacity;Perfect protection fuction:overload, short circuit, low battery voltage, improper operation etc,which won’t cause mechanical failures. The inverter and PC is connected through the RS232 communication interface, to understand the inverter work history, Automatic Turning, parameter monitoring, unattended and extend the functionality for remote network monitoring (via SNMP ADAPTER).This inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. and widely used in home and office.
Inverter Design Features
♦DC 96 to AC 100/110/120/220/230/240
♦Low frequency AC Grid Hybrid design, Combine Grid power and Solar Power Together ♦Automatically transform from battery mode to AC grid Mode
♦Intelligent CPU controlling technology
♦High efficiency inverter technology design
♦Wide input voltage , accurate output , AVR function .
♦Compltely auto stable voltage output
♦Pure Sine Wave output,Suitable for all kind of Resistive loads and inductive loads
♦Protection for over temperature, over load , short circuit ,over charge, over discharge ♦LED Display. LCD Display is optional
♦RS232 or USD communication monitoring interface((on the inverter’s back board)
♦Srong load-taking capacity
♦Easy to install & use
AC Grid And Solar/Wind Energy Interactive Inverters(AC Grid input is optional)
Our this kind of inverter combine AC grid and solar/wind energy,At first , the solar/wind energy will charge the battery by the solar/wind controller, then inverter will convert battery power(DC) to AC which the people can use . But when it is have no solar/wind energy and the battery is fully discharged, The inverter will automatically switch to AC grid and continue to drive the load ,Once the battery is full,The inverter will get back to battery state
Pure Sine wave
overload,short circuit,low battery voltage,high/low AC mains voltage
120% overload issue emergency alarms for 30 seconds ,125% overload issue emergency alarms for 10 seconds, then Switch to AC grid; 150% overload instantly Switch to AC grid. (automatic return to the normal state after decreasing loads )
Ac mains go through directly(optional) the inverter will automatically switch to AC mains and power the loads when the battery electricty is not enough .
Slow start (output voltage from small to large for 3 seconds)
AC Charger currtent
20—90% non condensing
≤40DBA(for 1 meter distance)
Solar Power System
96VDC Solar panel/Photovoltaic →96VDC Solar charge controller → 96VDC Battery Bank→96VDC Inverter →all kinds of AC loads
Process:At first The people use the solar panel to get the Solar Energy/Power , Than the Solar charge controller charge the battery to stock dc power and Provide the dc power with inverter ,Finally , the inverter change the DC power into AC power which the user can use.
96VDC Wind turbine→96VDC Wind charge controller →96VDC Battery Bank→96VDC Inverter →all kinds of AC loads .
Process:At first The people use the wind turbine to get the Wind Energy/Power , Than the wind charge controller charge the battery to stock dc power and Provide the dc power with inverter ,Finally , the inverter change the DC power into AC power which the user can use.
Function : The Solar Wind is renewable resources ,Saving energy and Environmental
Inverter Product Picture for 6KW to 10KW 96VDC
There are two kind of monophase inverter is as following , Which one is more suitable for you ? Pls don't hesitate to contact us , Welcome to you inquiry , Thanks !
1)When connect with both battery and utility power , the inverter with preferentially to drive the loads with DC power from batteries ,when the capacity of batteries is not enough ,the monophase inverter will automatically switch to drive the loads with utility power .This is DC first solar enegy and utility power complementary power generation system
2)When connected with batteries under the condition without utility power ,the monophase inverter will directly drive the loads with DC power from batteries ,This is off grid solar energy generation system.
The other power for your choose
Should you need more inoformation ,Pls feel free to contact us as following: